Метал детектор многозонов Elektral ThruScan s3

4 988,88 лв с ДДС

ThruScan s3

• Метал детектор многозонов - 3 зони на защита
• 10 нива на защита
• Автоматична настройка с обкръжаващата среда
• Напрежение 70-270V 50/60Hz
• Алармен брояч
• Комуникация RS232
• Съвременен дизайн
• LCD индикация
• Опция допълнително захранване UPS


- Летища
- Посолства
- Търговски центрове
- Училища
- Затвори
- Увеселителни заведения
- Други места, където сигурността е първостепенно з


• Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only) 
• We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual) 
• Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms (Far East Equipment’ Certification could be Potato Stamp) 
• No Set Up Change is Necessary regarding Winter/Summer Seasonal Adjustments and Resistant to Vibration &; Impact (Far Eastequipment my require Adjustments as per Temperature Changes) 
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination. 
• Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not detected at the same time) 
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. 
• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not) 
• Multi-Zone - 3 Detection Zones (Left/Middle/Right) 
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top 
• 10 sensitivity levels, 246 adjustable sensitivity steps at each 
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By 
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked) 
• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute 
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit 
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance 
• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen 
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation. 
• Five Digit Incoming Counter (Visible/Invisible) 
• IR Pass Sensor ON/OFF Selection 
• Four-digit changeable digital Pin Code 
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) 
• Reloading the factory default settings by one-touch button 
• Easy programming and monitoring with wide LCD display 
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish 
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms 
• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains 
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP) 
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design 
• IP 20 Protection Level (EN 60529) 
• Manufactured for 7/24 Continuous Operation 
• 74 cm Net Passage Width and 200 cm Net Passage Height 
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects 
• Audio-Visual alarms are noticeable at a range of 2 meters 
• Micro-Processor Settings does not change when there is an electricity cut-off 
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. 
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.

• Weight: 51 kg 
• Gross weight: 60 kg 
• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz 
• Power: 10W Stand By- 20W (Alarm) 
• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm 
• Ambient Temperature: -20°C to +70°


Няма продукти

0,00 лв Доставка
0,00 лв Общо

Количка Поръчай